Total: $0.00

Scratches on wood or laminate

We work with the PREMIUM Repair Kit. Alternatively, you can also use the Mini Repair Kit. The area to be repaired has to be clean, dry and free from grease. If necessary, remove any loose or sticking out particles.

Choose matching colors. Take care to apply always several colors from light to dark.

After activating the melter, melt off small portions of filler and mix together. Let wax mixture flow into the damage area. Note: Always slightly overfill the area!

Use the sharp grooves of the Special Fillers Applicator to strip off excess material. Note to the Mini Repair Kit: Use the grooves of the yellow battery melter to strip off excess material.

For precise adjustment, imitate the grain pattern with a darker color filler stick. Then again, level off excess material with the planer grooves.

To protect the repaired area, apply a sealing with the AQUA Brush Pen Clear Lacquer. Apply the lacquer evenly in one direction to the repaired area. If possible, do not apply lacquer to the surroundings. Note: The AQUA Brush Pen Clear Lacquer is not included in the Mini Repair Kit. When you use this kit, you can separately purchase an AQUA Brush Pen Clear Lacquer in our shop.

When the repaired area is dry (after approx. 10-15 minutes at room temperature), the sheen level can be adjusted with the Sanding and Polishing Pad. The green side of the pad polishes while the white side reduces the sheen level. Note: Sanding and Polishing Pad is not included in the Mini Repair Kit. If you use this kit, you can purchase Sanding and Polishing Pad in our shop separately.