SKU: 438620 Battery Melter Battery Melter for melting of Hard Wax and Ceramic Filler$40.001 Battery Melter, batteries not included Enter Quantity Produkt-TabsDescription The new Picobello Battery Melter is designed for the melting of fillers like hard wax and ceramic filler. The melter is powered by 3 x AA size batteries (the batteries are not included). The melter has a curved tip for mixing and optimal handling of the fillers - even in corners and edges. Handling and operation are simple. Colors/Color series Application To operate the melter, you require three 1.5V AA batteries. Insert the batteries as shown in the picture. Before operating the melter, take off protective cap. and set the yellow slide to the „ON“ position. To heat the melter, press and hold down the blue button for 10-15 seconds. A red light indicates that the melter is heating up. Should the Hard Wax start smoking during melting, release the „ON“ button – the tip cools down slowly. You can increase the temperature at any time while pressing the „ON“ button. Please do not forget to replace the cap when melter is no longer needed. Download: Instructions (PDF) Safety advices Always store melter with cap fitted and ensure ON/OFF switch is set to OFF position. Tip becomes hot during operation. Never bring the tool into contact with water. After operation, allow tip to cool down before storage. Always turn off melter after operation, while pushing the switch into the OFF position. You might also be interested in... Special Filler Applicator Special tool to level Ceramic Filler and Hard Wax AQUA Clear Lacquer Brush Pen Easy touching-up and sealing - with a waterbase Brush Pen
